System Connection Overview - Siemens SINUMERIK 808D ADVANCED Commissioning Manual
Hide thumbs
Also See for SINUMERIK 808D ADVANCED:
- Diagnostic manual (566 pages) ,
- Parameter manual (524 pages) ,
- Operating instructions manual (498 pages)
Table of Contents
Advertisement
4.1
System connection overview
SINUMERIK 808D ADVANCED control system
The following configuration shows a typical example of the SINUMERIK 808D ADVANCED T controller (PPU161.3) with the
SINAMICS V70 servo system, controlling two feed axes and one digital spindle. Note that the devices with an asterisk ("*")
are not included in the scope of delivery.
For more information about cable shield connection, see Section "Analog spindle interface - X54, spindle encoder
1), 2)
interface - X60 (Page 99)".
For more information about cable shield connection, see Section "Connecting the drive to motor (Page 126)".
3)
For more information about configuring the analog spindle, see Section "Configuring the drives (PPU161.3 and PPU160.2
4)
only) (Page 232)" or "Configuring an additional spindle (Page 260)".
Note
For more information about connecting the drive to a line filter or an external braking resistor, see Section "Connecting the
drive to motor (Page 126)".
Commissioning Manual
01/2017
81
Advertisement
Table of Contents
