Siemens SINUMERIK 808D ADVANCED Commissioning Manual page 506
Hide thumbs
Also See for SINUMERIK 808D ADVANCED:
- Diagnostic manual (566 pages) ,
- Parameter manual (524 pages) ,
- Operating instructions manual (498 pages)
Table of Contents
Advertisement
6.
Starting/stopping remote control
Proceed through the following steps to start/stop the remote control of the HMI:
1.
2.
3.
506
②
Use the following key to select the automatic response for the control system after the
above dialog box disappears with no softkey operations.
Press this softkey to save the settings.
Start the AMM tool and establish an Ethernet connection to the control system (see section
"Connecting with AMM (Page 51)").
Click the
button in the toolbar or select from the main window menu as follows to start the re-
mote control.
Once the remote control has been started, a monitoring window opens showing the HMI screen
contents of the connected control system. You can find a
screen.
Closing the monitoring window or selecting from the main window menu as follows stops the re-
mote control.
symbol in the tip area of the HMI
Commissioning Manual
01/2017
Advertisement
Table of Contents
