Node View Card Shortcuts; Node View Tabs; Figure 4-3 Facility Loopback Indicator; Table 4-4 Node View Tabs And Subtabs - Cisco ONS 15600 Reference Manual

Chapter 4 Cisco Transport Controller Operation
Figure 4-3

4.5.1.2 Node View Card Shortcuts

If you move your mouse over cards in the graphic, popups display additional information about the card
including the card type; card status (active or standby); the type of alarm, such as critical, major, and
minor (if any); and the alarm profile used by the card. Right-click a card to reveal a shortcut menu that
you can use to open, reset, change, or delete a card. Right-click a slot to preprovision a card (that is,
provision a slot before installing the card).

4.5.1.3 Node View Tabs

Table 4-4
Table 4-4
Tab
Alarms
Conditions
History
Circuits
Provisioning
Inventory
Maintenance
Facility Loopback Indicator
lists the tabs and subtabs available in the node view.
Node View Tabs and Subtabs
Description
Lists current alarms (CR, MJ, MN) for the
node and updates them in real time.
Allows you to retrieve a list of standing
conditions on the node.
Provides a history of node alarms including
date, type, and severity of each alarm. The
Session subtab displays alarms and events for
the current session. The Node subtab displays
alarms and events retrieved from a fixed-size
log on the node.
Allows you to create, delete, edit, and reroute
circuits.
Allows you to provision the ONS 15600 node. General, Network, OSI, BLSR,
Provides inventory information (part number,
serial number, Common Language Equipment
Identification [CLEI] codes) for cards installed
in the node. Allows you to delete and reset
cards, and change card service state. For more
information on card service states, see
Appendix B, "Administrative and Service
States."
Allows you to perform maintenance tasks for
the node.
Subtabs
—
—
Session, Node
Circuits, Rolls
Protection, Security, SNMP, Comm
Channels, Timing, Alarm Profiles,
Alarm Extenders, Defaults
—
Database, Routing Table, OSI,
BLSR, Protection, Software,
Diagnostic, Timing, Audit, Test
Access, Alarm Extenders, Preferred
Copy
Cisco ONS 15600 Reference Manual, R8.0
4.5.1 Node View
4-9