Four-Fiber Blsrs - Cisco ONS 15600 Reference Manual

Chapter 8 SONET Topologies and Upgrades
Figure 8-4
Node 3

8.3.2 Four-Fiber BLSRs

Four-fiber BLSRs double the bandwidth of two-fiber BLSRs. Because they allow span switching as well
as ring switching, four-fiber BLSRs increase the reliability and flexibility of traffic protection. Two
fibers are allocated for working traffic and two fibers for protection, as shown in
implement a four-fiber BLSR, you can install either two or four OC-48 or OC-192 cards at each BLSR
node, or a single ASAP card at each node. (Each ASAP card provides up to sixteen OC-48 ports or four
OC-192 ports. Refer to the
Four-Node, Two-Fiber BLSR Traffic Pattern Following Line Break
Node 0
OC-48 Ring
Node 2
"2.8 ASAP Card" section on page 2-19
8.3.2 Four-Fiber BLSRs
Node 1
Traffic flow
Fiber 1
Fiber 2
Figure
for more information.)
Cisco ONS 15600 Reference Manual, R8.0
8-5. To
8-5