Sfp/Xfp Modules; Figure 2-12 Ons 15600 Filler Card - Cisco ONS 15600 Reference Manual

Chapter 2 Card Reference

2.10 SFP/XFP Modules

Figure 2-12 shows the Filler card body and faceplate.
Figure 2-12 ONS 15600 Filler Card
2.10 SFP/XFP Modules
This section describes the SFPs that provide the fiber interface to the ONS 15600 ASAP card when used
with the 4PIO modules. A line rate (OC-3, OC-12, OC-48, or Gigabit Ethernet) must be assigned to each
SFP in the CTC software interface or using TL1. In CTC, SFPs are known as pluggable port modules
(PPMs). To provision PPMs, refer to the Cisco ONS 15600 Procedure Guide.
For information about XFPs, which allow you to provision an OC-192 line rate when used with the 1PIO
Note
module, see the "2.10.1 XFP Description" section on page 2-28.
Table 2-22 lists the SFPs (PPMs) that are compatible with the ASAP card.
Cisco ONS 15600 Reference Manual, R8.0
2-26