Pluggable Equipment Service State Transitions - Cisco ONS 15600 Reference Manual

Appendix B Administrative and Service States
Table B-5
Current Service State
OOS-AUMA,FLT & MT
OOS-MA,DSBLD
OOS-MA,LPBK & MT
OOS-MA,MT
B.3.3 Pluggable Equipment Service State Transitions
The service state transitions for pluggable equipment are the same as for other equipment with the
exceptions listed in
Pluggable equipment (pluggable interface modules [PIMs] and pluggable port modules [PPMs]) will
Note
transition out of the UAS state when inserted if the software can read the EEPROM and identify
information on the pluggable equipment. If the software cannot read the pluggable equipment, the
equipment is considered invalid and will not transition out of the UAS state.
ONS 15600 Port and Cross-Connect Service State Transitions (continued)
Action
Alarm/condition is cleared.
Put the port or cross-connect in
the IS administrative state.
Put the port or cross-connect in
the IS,AINS administrative state.
Put the port or cross-connect in
the OOS,DSBLD administrative
state.
Put the port or cross-connect in
loopback.
Put the port or cross-connect in
the IS administrative state.
Put the port or cross-connect in
the IS,AINS administrative state.
Put the port or cross-connect in
the OOS,MT.
Release the loopback.
Alarm/condition is raised.
Put the port or cross-connect in
the IS administrative state.
Put the port or cross-connect in
the IS,AINS administrative state.
Put the port or cross-connect in
the OOS,DSBLD.
Put the port or cross-connect in
loopback.
Alarm/condition is raised.
Table B-6.
B.3.3 Pluggable Equipment Service State Transitions
Next Service State
OOS-MA,MT
OOS-AU,FLT
OOS-AU,AINS & FLT
OOS-MA,DSBLD
OOS-AUMA,FLT & LPBK &
MT
IS-NR
OOS-AU,AINS
OOS-MA,MT
OOS-MA,MT
OOS-AUMA,FLT & LPBK &
MT
IS-NR
OOS-AU,AINS
OOS-MA,DSBLD
OOS-MA,LPBK & MT
OOS-AUMA,FLT & MT
Cisco ONS 15600 Reference Manual, R8.0
B-7