Figure 7-2 Path Protection Circuit On The Edit Circuit Window; Table 7-4 Port State Color Indicators - Cisco ONS 15600 Reference Manual

7.2.5 Circuit Information in the Edit Circuit Window
Figure 7-2
Figure 7-2
By default, the working path is indicated by a green, bidirectional arrow, and the protect path is indicated
by a purple, bidirectional arrow. Source and destination ports are shown as circles with an S and D,
respectively. Port states are indicated by colors, shown in
Table 7-4
Port Color
Green
Gray
Purple
Cyan (Blue)
A notation within or by the squares or selector pentagons in detailed view indicates switches and
loopbacks, including:
F = Force switch
•
M = Manual switch
•
L = Lockout switch
•
• Arrow = Facility (outward) or terminal (inward) loopback
Figure 7-3
Cisco ONS 15600 Reference Manual, R8.0
7-10
shows a bidirectional STS circuit routed on a path protection.
Path Protection Circuit on the Edit Circuit Window
Port State Color Indicators
Service State
IS-NR
OOS-MA,DSBLD
OOS-AU,AINS
OOS-MA,MT
shows an example of the Edit Circuit window with a terminal loopback.
Chapter 7 Circuits and Tunnels
Table 7-4.