Dlp-L81 Connecting Office Power (Ac) To The Ncs 2015 Shelf - Cisco NCS 2006 Hardware Installation Manual

DLP-L81 Connecting Office Power (AC) to the NCS 2015 Shelf

This product relies on the building's installation for short-circuit (overcurrent) protection. Ensure
Warning
that the protective device is rated not greater than: 10A-20A, 100-240 VAC~. Statement 1005
A readily accessible two-poled disconnect device must be incorporated in the fixed wiring. Statement
Warning
1022
This unit might have more than one power supply connection; all connections must be removed to
Warning
de-energize the unit. Statement 1028
Always use an ESD wristband when working with a powered NCS 2015. For detailed instructions on how
Caution
to wear the ESD wristband, see the
Series.
Procedure
Step 1 Verify that the correct fuse and alarm panel is installed in the top mounting space.
• For a DC power supply, the fuse rating must not exceed 60 A.
• For an AC power supply, the fuse rating must not exceed 20A. For North America, the branch circuit
Step 2 Connect the office ground to the NCS 2015 shelf. For detailed instructions on grounding, see the
Discharge and Grounding Guide for Cisco NCS 2000 Series
Step 3 Depending on the shelf and the power module installed, complete the necessary task:
Step 4 Complete the
Step 5
Continue with
Stop. You have completed this procedure.
DLP-L81 Connecting Office Power (AC) to the NCS 2015 Shelf
Purpose
Cisco NCS 2000 Series Hardware Installation Guide
336
protection must be rated 20A. The overcurrent/short circuit protection must be in accordance with local
and national electrical codes.
DLP-L80 Turning On and Verifying DC Office Power on the NCS 2015 Shelf, on page 344
NTP-L54 Installing Fan-Tray Assembly in NCS 2015 Shelf, on page 393
Electrostatic Discharge and Grounding Guide for Cisco NCS 2000
.
This task connects AC power to the NCS 2015 shelf.
Connecting Power and Ground
Electrostatic
.