Cisco Ncs 2000 Series Hardware Installation Guide - Cisco NCS 2006 Hardware Installation Manual

Mounting the Cisco NCS 2002 Brackets
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Use only the fastening hardware provided with the NCS 2002 to prevent loosening, deterioration, and
Caution
electromechanical corrosion of the hardware and joined material.
The air deflectors can be installed only in the front position of the chassis.
Note
Procedure
Step 1
Place the right front air deflector flush against the right side of the chassis (see Diagram 1 of the following
figure).
Step 2 Align the screw holes on the right front air deflector with the screw holes on right side of the chassis.
Step 3 Insert the screws and tighten them to a torque value of 11.5 in-lb (1.3 N-m).
Step 4
Place the air deflector cover on the rear end of the chassis.
Step 5 Insert the screws and tighten them to a torque value of 11.5 in-lb (1.3 N-m). See Diagram 2 of the following
figure).
Step 6
Place the mounting bracket flush against the left side of the chassis (see Diagram 2 of the following figure).
Step 7 Align the screw holes on the mounting bracket with the screw holes on the left side of the chassis.
Step 8 Insert the screws and tighten them to a torque value of 11.5 in-lb (1.3 N-m).
Step 9 Place the mounting bracket flush against the right side of the chassis (see Diagram 2 of the following figure).
Step 10 Align the screw holes on the mounting bracket with the screw holes on the left side of the chassis.
Step 11 Insert the screws and tighten them to a torque value of 11.5 in-lb (1.3 N-m).
Step 12 Place the left top air deflector flush against the left side of the chassis as shown in Diagram 3 of the following
figure.
Note
DLP-L41 Mounting the Bracket with Air Deflectors (Front-to-Top) on the NCS 2002 Shelf for ETSI Rack Configuration
If the 100G-LC-C, 10x10G-LC, or CFP-LC cards are to be installed in the NCS 2002 shelf, do not
mount the left top deflector (exhaust air deflector). Use the standard brackets directly to mount the
NCS 2002 shelf.
NTP-L41 Unpacking and Inspecting the Shelf, on
page 20.
As needed
Onsite
None

Cisco NCS 2000 Series Hardware Installation Guide

59