Motor Setup - Honeywell 900 User Manual

I/O Calibration

Motor Setup

Motor Setup
The Motor Setup display lets you set the motor's Deadband, Travel Time, Low Output Limit, and High
Output Limit.
Item
Select PPO Block
Dead Band
Travel Time
Output Low Limit
Output High Limit
172
Select a motor.
Deadband is an adjustable gap between forward and reverse motor operation (the range
over which the output can change before a relay is energized).
Travel time is the time it takes the motor to travel from its calibrated 0% position to its
calibrated 100% position.
Low limit for the motor position.
High limit for the motor position.
900 Control Station User Guide
Description
Revision 9
May 2014