VARIABLE RECIPES
Overview
To transfer the values of a variable recipe from the recipe pool of the controller to the various analog and
digital variables in the controller configuration, touch the desired recipe on the display, a yellow highlight
will verify your selection, then press the LOAD RECIPE button on the display widget.
Hint: When making variable recipes, users may wish to include a variable that will be used to identify the
recipe number. The value of this variable may then be added to the Variable Recipe Load display to
receive verification that the desired recipe operation has been executed in the controller. See Figure 8
118
Figure 8 Variable Recipe Selection Display
900 Control Station User Guide
Revision 9
May 2014