Setpoint Scheduler Operate; Setpoint Schedulers - Honeywell 900 User Manual

Setpoint Scheduler

Setpoint Scheduler Operate

Setpoint Scheduler Operate
This widget may be accessed from a Home display button. It shows the details of the schedule currently
running in the Setpoint Scheduler. You can also load a different schedule from memory into the Setpoint
Scheduler, edit the current schedule, and save the edited schedule to any slot (schedule number) in memory.
Item
Title
Schedule Information
Schedule number
Schedule name
Schedule Description
Total Elapsed Time
State
Segment Information
Segment number
134
Name of the selected scheduler block.
Memory location of the schedule that is being run by the Setpoint
Scheduler.
Name of the selected schedule.
Description of the schedule.
Total time the schedule has been in Run, Hold and Ghold states.
READY: Schedule is at the beginning of segment and is ready to run. All
events are OFF.
HOLD: Schedule is paused at the setpoint value shown.
RUN: Schedule is executing normally.
GHOLD: Schedule is paused because of excessive deviation.
STOP: Schedule has reached the end of the last segment.
DISABLE: Schedule is prevented from starting until the Scheduler disable
control is ON.
Current segment
900 Control Station User Guide
Description
Revision 9
May 2014