Export Data Logs To Usb; View Batch Groups & View Batch Status - Honeywell 900 User Manual

Export Data Logs to USB

Export Data Logs to USB
Lets you export data logs from the CompactFlash to USB. Insert USB memory device into Port A. (Export
does not function without USB device inserted.). Note: USB 3.0 support is only available on the 900CS10.
Total Memory and Free Memory are displayed for CompactFlash and USB memory device. Touch the Get
CF Status or Get USB Status buttons to update status. Touch Export All Data button to export
CompactFlash data to the USB device. USB device must have enough free memory.
Export Selected Data button shows CompactFlash data and USB memory device data. Press >> and << to
transfer data between the two devices.
File/ folders can't be copied from USB memory device to CompactFlash's LOG folder.
View Batch Groups & View Batch Status
(Concurrent Batch for Control Station)
The operator at the 900 Control Station can simply touch the LOGS button on the master slide to access the
Data Logging menu. (Alternately, you can touch the soft key Menu > Data Logging.) The Data Logging
menu has two buttons on it for concurrent batch. View Batch Groups and View Batch Status.
View Batch Groups Summary Display
The operator can touch the View Batch Groups button on the Data Logging menu to display the Batch
Groups display. This display shows a summary of which batch groups have a batch running in them. A
green arrow on a batch group button means a batch is running, while a red square means a batch is not
running:
Revision 9
May 2014
900 Control Station User Guide
Main Menu
Data Logging
71