Preset Channels: Instant Access; Programming - Standard Horizon QUANTUM GX6500E Owner's Manual

In the default setting, Channel 16 is set as the priority channel. You
may change the priority channel to the desired channel from Channel
16 on the SETUP menu. Refer to section "16.7 PRIORITY CHANNEL".
7.9

PRESET CHANNELS: INSTANT ACCESS

10 preset channels can be programmed for instant access. Press the ►/◄
key repeatedly, then press the [PRESET] soft key. Pressing the [PRESET]
key activates the user assigned channel bank. If the [PRESET] soft key is
pressed and no channels have been assigned, an alert beep will be emitted
from the speaker.
Before beginning the Instant Access operation, assign the "PRESET" command
into one of the programmable keys, refer to section "15.8 SOFT KEYS".
7.9.1

Programming

1. Rotate the DIAL/ENT knob to select the channel to
be programmed.
2. Press the ►/◄ key repeatedly to indicate the function
on the display, then press and hold the [PRESET] soft
key until the "P-SET" icon and channel number are
blinking.
3. Press the [ADD] soft key to program the channel
into the preset channel memory. "[P-SET]" icon will
appear.
4. Repeat steps 1 through 3 to program the desired
channels into the preset channels. Up to 10 channels
can be registered. If you attempt to register the 11th
channel, error beep will sound.
Page 46
NOTE
GX6500E/GX6000E