Rx Recorder; Rx Recorder Function On/Off; Setting For Recording Delay Time - Standard Horizon QUANTUM GX6500E Owner's Manual

15.12 RX RECORDER

Configure settings of the function for recording received voices.

15.12.1 RX Recorder Function ON/OFF

Enable/disable the RX Recorder function. The default setting is "OFF".
1. Press the MENU key to display "MENU".
2. Rotate the DIAL/ENT knob to select "SETUP", then
press the [SELECT] soft key.
3. Rotate the DIAL/ENT knob to select "CHANNEL
SETUP", then press the [SELECT] soft key.
4. Rotate the DIAL/ENT knob to select "RX RECORDER",
then press the [SELECT] soft key.
5. Rotate the DIAL/ENT knob to select "ACTIVATION",
then press the [SELECT] soft key.
6. Rotate the DIAL/ENT knob to select "ON" or "OFF", then
press the [ENTER] soft key to store the new setting.
7. Press the CLEAR key to return to radio operation.

15.12.2 Setting for Recording Delay Time

Set the time interval until recording stops after the end of voice reception. The
default setting is 3 seconds.
1. Press the MENU key to display "MENU".
2. Rotate the DIAL/ENT knob to select "SETUP", then
press the [SELECT] soft key.
3. Rotate the DIAL/ENT knob to select "CHANNEL
SETUP", then press the [SELECT] soft key.
4. Rotate the DIAL/ENT knob to select "RX RECORDER",
then press the [SELECT] soft key.
Page 154 GX6500E/GX6000E