Scan Resume; Multi Watch; Priority Channel - Standard Horizon QUANTUM GX6500E Owner's Manual

15.5

SCAN RESUME

This selection is used to select the time the GX6500E/GX6000E waits after a
transmission ends before the radio starts to scan channels again. The default
setting is 2 seconds.
1. Press the MENU key to display "MENU".
2. Rotate the DIAL/ENT knob to select "SETUP", then
press the [SELECT] soft key.
3. Rotate the DIAL/ENT knob to select "CHANNEL
SETUP", then press the [SELECT] soft key.
4. Rotate the DIAL/ENT knob to select "SCAN RESUME",
then press the [SELECT] soft key.
5. Rotate the DIAL/ENT knob to select the desired
resume time, default is 2 seconds. The resume time
can be set to "1sec" through "5sec".
6. Press the [ENTER] soft key to store the new setting.
7. Press the CLEAR key to return to radio operation.
15.6

MULTI WATCH

This selection is used to select the watch type between "DUAL" and "TRIPLE".
The default setting is "DUAL".
Refer to section "8.8 MULTI WATCH (TO PRIORITY CHANNEL)" for details.
15.7

PRIORITY CHANNEL

This procedure allows the radio to use a different priority channel used when
priority scanning. By default the radio priority channel is set to Channel 16.
1. Press the MENU key to display "MENU".
2. Rotate the DIAL/ENT knob to select "SETUP", then
press the [SELECT] soft key.
3. Rotate the DIAL/ENT knob to select "CHANNEL
SETUP", then press the [SELECT] soft key.
4. Rotate the DIAL/ENT knob to select "PRIORITY CHAN-
NEL", then press the [SELECT] soft key.
Page 150 GX6500E/GX6000E