Display Direction; Location Format - Standard Horizon QUANTUM GX6500E Owner's Manual

After setting the "PRIMARY" and "SECONDARY" devices, the last
device will be displayed as "THIRDLY". "THIRDLY" is set automatically
and you cannot specify the "THIRDLY" device.
17.2

DISPLAY DIRECTION

This menu item selects the compass direction to be shown on the GX6500E/
GX6000E display. The default setting is "COURSE-UP".
1. Press the MENU key to display "MENU".
2. Rotate the DIAL/ENT knob to select "SETUP", then
press the [SELECT] soft key.
3. Rotate the DIAL/ENT knob to select "GPS SETUP",
then press the [SELECT] soft key.
4. Rotate the DIAL/ENT knob to select "COMPASS DIREC-
TION", then press the [SELECT] soft key.
5. Rotate the DIAL/ENT knob to select the desired direc-
tion from "COURSE-UP" and "NORTH-UP".
6. Press the [ENTER] soft key to save the new setting.
7. Press the CLEAR key to return to radio operation.
17.3

LOCATION FORMAT

This menu item selects the coordinate system to be shown on the GX6500E/
GX6000E display. The default setting is "ddd°mm.mmmm".
1. Press the MENU key to display "MENU".
2. Rotate the DIAL/ENT knob to select "SETUP", then
press the [SELECT] soft key.
3. Rotate the DIAL/ENT knob to select "GPS SETUP",
then press the [SELECT] soft key.
4. Rotate the DIAL/ENT knob to select "LOCATION
FORMAT", then press the [SELECT] soft key.
GX6500E/GX6000E
NOTE
Page 165