8.3
GPS LOGGER OPERATION
The GX6500E/GX6000E* includes a logger for position information that allows
you to record your location at regular intervals. (* The GX6000 requires optional
SCU-31 GPS Receiver.)
1. Press the [LOGGER] soft key to turn the function on
or off.
The recording starts and the display returns to the
previous screen with the "
display.
• You may change the log interval time of recording
via the SETUP menu.
Note: To utilize the records, connect the GX6500E/
GX6000E to a PC and download the log data from
the radio by using the PC Programming Software.
Refer to section "20 CONNECTING A USB DATA
TERMINAL TO THE PC".
Logger operation alert:
• When the memory for log data becomes full, three beeps will sound and a
warning message will be displayed. Afterwards the logger does not operate
until the log data in the memory are erased.
• When the logger cannot record for some reason, three beeps will sound
and a warning message will be displayed. Afterwards the logger does not
operate anymore.
• An error message will be displayed when the radio cannot erase the log data
in the memory during the operation following the alert of memory full (see
above) or in the SETUP menu (Refer to section "18.10.6 Log Erase").
GX6500E/GX6000E
" icon on the top of the
Page 59