Key Timer - Standard Horizon QUANTUM GX6500E Owner's Manual

DISPLAY
NONE
TX HI/LO
WX/CH
SCAN
DUAL WATCH
MARK POSITION
SCAN MEMORY
PRESET
MAN OVER BOARD Marks the position where a person falls overboard.
NOISE CANCEL
CH NAME
STROBE
SCRAMBLER
COMPASS
WAYPOINT
PA/FOG HORN
INTERCOM
GPS LOGGER
AIS DISPLAY
FOG HORN
PUBLIC ADDRESS
RX RECORD
RX SENSE
IC SELECT
PLAY
14.8.2

Key Timer

1. Press the MENU key to display "MENU".
2. Rotate the DIAL/ENT knob to select "SETUP", then
press the [SELECT] soft key.
3. Rotate the DIAL/ENT knob to select "CONFIGURA-
TION", then press the [SELECT] soft key.
4. Rotate the DIAL/ENT knob to select "SOFT KEY", then
press the [SELECT] soft key.
5. Rotate the DIAL/ENT knob to select "KEY TIMER",
then press the [SELECT] soft key.
Page 146
FUNCTION
Selects transmit power.
Switches channels between weather and marine.
Turns on or off scanning function.
Starts and stops dual watch scan.
Marks the current position for a "Waypoint".
Add or remove channels from memory channel scan.
Programs or deletes the preset memory channel.
Enables the noise canceling settings display.
Edit channel names.
Turns on or off the strobe light LED.
Configures the secret communication settings.
Enables the "Compass" display.
Enables the "Waypoint" or "Route" navigation display.
Select PA, FOG HORN, or HORN mode.
Activates intercom between radio and RAM4 mic
(optional RAM4 required).
Starts and stops logging position data.
Shows the "AIS" display.
Activates the Fog Horn function.
Activates the PA function.
Records received voices.
Toggles between LOCAL and DISTANCE.
Select the device you want to communicate with using
the intercom.
Plays recorded voices.
−
SOFT KEY NUMBERS
ASSIGNED AS DEFAULT
(See the previous page.)
−
02
01
05
06
09
04
10
03
12
07
11
08
GX6500E/GX6000E