Standard Horizon QUANTUM GX6500E Owner's Manual page 80

6. In the INTERSHIP CH list, rotate the DIAL/ENT knob
to select the operating channel on which you want to
communicate, then press the [SELECT] soft key. To
select operating channels from all voice channels,
press the [MANUAL] soft key.
7. Press the [YES] soft key to transmit the group call
signal.
8. When the group call signal is sent, the display will be
as shown in the illustration at the right.
9. After the group call is transmitted, all the radios in the
group will switch to the designated channel.
10. Listen to the channel to make sure it is not busy, then
press the microphone's PTT switch and call the other
vessel you desire to communicate with.
Group Call by Manually Entering an MMSI
This feature allows you to contact a group of vessels by entering in their group
MMSI manually.
1. Press the MENU key to display "MENU".
2. Rotate the DIAL/ENT knob to select "DSC CALL", then
press the [SELECT] soft key.
3. Rotate the DIAL/ENT knob to select "GROUP CALL",
then press the [SELECT] soft key. (To cancel, press
the [BACK] soft key.)
4. Rotate the DIAL/ENT knob to select "MANUAL", then
press the [SELECT] soft key.
Page 80 GX6500E/GX6000E