Option Gps Unit; Unit Power - Standard Horizon QUANTUM GX6500E Owner's Manual

• Data output will be performed based on the data acquisition order of
priority configured from "ORDER OF PRIORITY". Refer to section "18.1
ORDER OF PRIORITY" for details.
• While "UNIT POWER" of "OPTION GPS UNIT" is set to OFF, NMEA
sentences will not be output. (OPTION GPS reception data will be
output as is.)
• The output interval of each NMEA sentence depends on the output
timing on the input device. However, sentences which include POS
data will be output at intervals of two seconds or less.
• When all sentences are set to be output, depending on the baud rate,
not all sentences can be output at intervals of one second or less. GSA
and GSV sentences will be output at intervals of around five seconds.

17.10 OPTION GPS UNIT

Change the OPTION GPS UNIT setting.

17.10.1 Unit Power

When you use the optional Standard Horizon GPS Antenna (SCU-31), set this
selection to "ON". The default setting is "OFF".
1. Press the MENU key to display "MENU".
2. Rotate the DIAL/ENT knob to select "SETUP", then
press the [SELECT] soft key.
3. Rotate the DIAL/ENT knob to select "GPS SETUP",
then press the [SELECT] soft key.
4. Rotate the DIAL/ENT knob to select "OPTION GPS
UNIT", then press the [SELECT] soft key.
5. Rotate the DIAL/ENT knob to select "UNIT POWER",
then press the [SELECT] soft key.
GX6500E/GX6000E
NOTE
Page 169