Nmea 0813/Nmea 0183-Hs To Chart Plotter - Standard Horizon QUANTUM GX6500E Owner's Manual

5.6.4

NMEA 0813/NMEA 0183-HS to Chart Plotter

4800 Baud Connections
Wire Color/Description
BLUE - NMEA GPS Input (+)
GREEN - NMEA GPS Input (−)
GRAY - NMEA DSC Output (+)
BROWN - NMEA DSC Output (−)
YELLOW - AIS Data Output (+)
WHITE - AIS Data Output (−)
*1: 4800 baud
*2: 38400 baud
Note: Some GPS chart plotters have a single wire for NMEA signal ground. In such a case connect
the NMEA input (−) to the GPS chart plotter's single NMEA signal ground wire, and leave the NMEA
output (−) open. In case the assignment of power supply and ground of a GPS chart plotter to be
used is different from that of the radio, connect the signal ground wire of the GPS chart plotter to
the ground terminal (GND) on the rear panel of the radio.
GX6500E/GX6000E
GPS Antenna
Radio Wires
Blue: NMEA IN ( )
Green: NMEA IN ( )
Gray: NMEA OUT ( )
Brown: NMEA OUT ( )
Yellow: NMEA-HS OUT ( )
White: NMEA-HS OUT ( )
No connection
No connection
NMEA (+) input of GPS*
NMEA (−) input of GPS*
NMEA-HS (+) input of AIS receiver*
NMEA-HS (−) input of AIS receiver*
Plotter Connection
No Connection
No Connection
NMEA IN ( )
NMEA IN ( )
( )
NMEA -HS IN
( )
NMEA -HS IN
Connection Examples
1
1
2
2
GPS Chart Plotter
Page 21