9.7.5
Setting up a Position Report Ringer
The GX6500E/GX6000E has the capability to turn off the position report ringer.
1. Press the MENU key to display "MENU".
2. Rotate the DIAL/ENT knob to select "SETUP", then
press the [SELECT] soft key.
3. Rotate the DIAL/ENT knob to select "DSC SETUP",
then press the [SELECT] soft key.
4. Rotate the DIAL/ENT knob to select "DSC BEEP", then
press the [SELECT] soft key.
5. Rotate the DIAL/ENT knob to select "POS REPORT",
then press the [SELECT] soft key.
6. Rotate the DIAL/ENT knob to select "OFF".
7. Press the [ENTER] soft key to store the selected
setting.
8. Press the CLEAR key to return to radio operation.
To re-enable the ringer tone, repeat the above procedure, rotating the DIAL/
ENT knob to select "ON" in the step 6 above.
Page 94
c
GX6500E/GX6000E
c