Noise Cancellation - Standard Horizon QUANTUM GX6500E Owner's Manual

5. Rotate the DIAL/ENT knob to select the channel to
be named, then press the [SELECT] soft key.
6. Rotate the DIAL/ENT knob to scroll through the first
letter of the new channel name.
7. Press the [SELECT] soft key to store the first letter
in the name and step to the next letter to the right.
8. Repeat step 6 and 7 until the name is complete. The
name can consist of up to 16 characters, if you do
not use all 16 characters, select "→" to move to the
next space. This method can also be used to enter a
blank space in the name.
If a mistake was made entering in the channel name, rotate the DIAL/ENT
knob to select "←" or "→", press the [SELECT] soft key until the wrong
character is selected, then perform steps 6 and 7.
9. When finished entering the channel name (using
fifteen characters or less), press the [FINISH] soft
key to save the name.
10. If you want to enter the name of another channel,
repeat the steps 5 through 9.
11. Press the CLEAR key to return to radio operation.
When "CHANNEL NAME" is assigned to the soft key, you can show
the channel name input display directly by pressing the [NAME] soft
key during radio operation.

15.10 NOISE CANCELLATION

Enables/disables the Noise-canceling function of the transmitter and receiver
independently.
1. Press the MENU key to display "MENU".
2. Rotate the DIAL/ENT knob to select "SETUP", then
press the [SELECT] soft key.
3. Rotate the DIAL/ENT knob to select "CHANNEL
SETUP", then press the [SELECT] soft key.
4. Rotate the DIAL/ENT knob to select "NOISE CANCEL",
then press the [SELECT] soft key.
Page 152
NOTE
GX6500E/GX6000E