The Advanced Display Menus; Table 6 - Advanced Display Main Menu Structure - Honeywell stt850 SMARTLINE User Manual

4.1.5 The Advanced Display Menus

The Advanced Display menus are organized into three levels, as shown by
<Return> menu item at each level that allows the user to return to the previous level.
Level 1
<Exit>
Diagnostics
Display Setup
Calibration
Transmtr Setup
Information
Page 24
Table 6 – Advanced Display Main Menu Structure
Level 2
n/a
Critical
Non-Critical
LCD Contrast
Common Setup
Screen 1
Screen 2
...
Screen 8
Cal Points
Set Time Stamp
S1 CVD Cal Pts
S2 CVD Cal Pts
S1 Cal Hi/Lo (HART only)
S2 Cal Hi/Lo (HART only)
Reset Cal 1&2 Corr
(HART only)
LRV/URV Reset Correct
(DE only)
DAC Trim (HART/DE)
Loop Test (HART/DE)
Device Setup
HART Setup
HART Date
Sensor Setup
Sensor 1 CVD (HART/FF)
Sensor 2 CVD (HART/FF)
Digital Output (HART only)
Range values (FF only)
LRV (HART/DE)
URV (HART/DE)
MRV (HART only)
Set LRV (HART/DE)
Set URV (HART/DE)
Dev Install Date (HART/FF)
S1 Install Date (HART/FF)
S2 Install Date (HART/FF)
Display
Comm Module
Sensor Module
STT850 Temperature Transmitter User's Manual
Table 6.
Level 3
n/a
For details go to the Diagnostics Menu table
For details go to the Display Setup Menu
table.
Note that the Advanced Display supports the
configuration of up to 8 different screens.
For details go to the Calibration Menu table.
For details go to the Transmitter Setup Menu
table.
For details go to the Information Menu table.
There is a
Revision 3