Honeywell stt850 SMARTLINE User Manual page 59

PV Value
PV Status:
Revision 3
User Configurable. This field has 7 characters.
Maximum allowable numeric value of 9999999 or -999999.
If fractional decimals are configured, the fractional positions will be
dropped as required.
If the PV exceeds the values above limits, the PV is divided by 1000 and
"K" is appended to the result, allowing a maximum value with multiplier of
999999K or -99999K
Good The transmitter is operating normally
Bad The transmitter has detected a fault condition.
The PV Status field will flash when this condition is present and
the PV Value will be displayed on a black background as shown
below:
Unc Uncertain (this status is only available for Fieldbus transmitters)
The PV Value is outside of normal limits.
STT850 Temperature Transmitter User's Manual
Page 49