Table 11 -Information Menus - Honeywell stt850 SMARTLINE User Manual

<Return> Return to the Level 1 menu
<Return>
Display
Firmware Version
<Return>
Firmware Version
Software Rev
(HART/DE only)
Comm Module
Protocol
Serial Number
(FF only)
<Return>
Firmware Version
Model Key
Units
Sensor Module
S1 LRL
S1 URL
S2 LRL (Dual
Inputs only)
(HART/FF only)
S2 URL (Dual
Inputs only) (HART
/FF only)
Revision 3
Table 11 –
Information Menus
The firmware version of the Display Module
The firmware version of the Electronics Module
The firmware version number of the Electronics
Module as displayed via the HART and DE
protocols
The communications protocol of the transmitter:

HART: HART protocol

DE: Honeywell DE protocol

FF: Foundation Fieldbus
Serial number of the Fieldbus Comms module
The firmware version of the Sensor Module
Identifies the type and range of the transmitter
The Engineering Units for the LRL and URL.
Note that you can change these Units from the
Transmitter Setup menu, if desired (Transmitter
Setup\Parameters\Units)
The Lower Range Limit of the Input 1 Sensor
The Upper Range Limit of the Input 1 Sensor
The Lower Range Limit of the Input 2 Sensor
The Upper Range Limit of the Input 2 Sensor
STT850 Temperature Transmitter User's Manual
Read
Only
Read
Only
Read
Only
Read
Only
Read
Only
Read
Only
Read
Only
Read
Only
Read
Only
Read
Only
Read
Only
Read
Only
Page 37