Button Operation During Monitoring - Honeywell stt850 SMARTLINE User Manual

PV Function Block
Mode
Process Variable Tag
Engineering Units
Bar Graph
Trend graph

4.1.15 Button operation during monitoring

When the operator screens are active on the Advanced Display, the Increment and Decrement buttons
( and ) can be used to move to the next or previous operator screen without waiting for the rotation
time to expire. Pressing the Enter button (
Page 50
The Function Block Mode is only displayed for Foundation Fieldbus
transmitters. The eight possible Modes are shown below.
OOS Out Of Service
Auto Automatic
Man Manual
Cas Cascade
User Configurable. This field has 14 characters
User Configurable.
This field has 2 characters in case of HART and DE
Note: In case of Fieldbus, this field has 8 characters to configure Custom
Units , which is applicable when Units configured to "Custom" from host)
Temperature
o
C
o
F
o
R
K (Kelvin)
The limits of the bar graph are user-configurable for each screen.
The limits of the trend graph are user-configurable for each screen.
The amount of time visible on the Trend graph is also configurable.

) will call up the Main Menu.
STT850 Temperature Transmitter User's Manual
RCas Remote Cascade
Rout Remote Output
IMan Initialization Manual
LO Local Override
Other:
(%) percent
(mV) millivolt
mA (milliampere)
Custom - applicable to FF only
Revision 3