Front Panel - D-Link DVG-2101SP User Manual

DVG-2101SP User Manual

Front Panel

Power LED
This LED will light solid when the
device finishes a self-test and
booting up. This LED will flash
during device self-test and booting
and light off if the self-test fails.
Provision LED
This LED will light up solid if the
device provisions successfully. The
LED will flash during provisioning
and will be off if provisioning fails.
Register LED
This LED will light solid if the phone
account registers successfully. This
LED will flash during registering and
light off if registering fails.
WAN LED
This LED will light solid when a connection
is established and blink to indicate activity.
If this LED does not light up when a cable is
connected, verify the cable connections and
make sure your devices are powered on.
Phone LED
This LED will light solid when the
telephone is off-hook. A fast blinking
LED indicates an incoming call and
a slow blinking LED indicates a
message is waiting. This LED will
light off if the phone connected to
the phone port is on-hook.
Line LED
This LED will light solid when
a connection is established
and blink to indicate activity.
Copyright © 2008 D-Link Australia Pty. Ltd.