Features - D-Link DVG-2101SP User Manual

DVG-2101SP User Manual

Features

• WAN Support
- One 10/100Mbps auto-MDI/MDIX Ethernet port
- WAN Type: Static IP, Dynamic IP & PPPoE
- MAC Address Clone
- NAT Traversal: Outbound Proxy, STUN
- Dynamic DNS support: DLinkDDNS, DynDNS
- VLAN ID Tag
- QoS: IP Precedence
- NTP
• Management
- Web-based (HTTP), Telnet, and Telephone keypad configuration (dial prefix)
- Built-in Ping Tool
- Remote firmware upgrade via TFTP, HTTP, HTTPS, and FTP
- Multi-function reset button: IVR , reset , restore factory default settings
- Password Protected - controlled Admin and User Access Authority
- Auto Provisioning:
+ Web-based Administration and Configuration via Integrated Web Server
+ Telephone Key Pad Configuration with Interactive Voice Prompts, Automated Provisioning &
Upgrade via HTTPS, HTTP, TFTP, FTP
- Interactive Voice Response (IVR)
- SNMP V1/V2C
• Call In & Call Out
- Voice over IP Call
- PSTN Phone Call (out only)
- IP Address Calling
- Three Way IP to IP Conference Call
• Call Features
- Call Forwarding: No Answer / Busy / Unconditional
- Call Transfer: Unattended / Attended
- Call Waiting / Call Pickup / Call Hold / Call Back On Busy / Call Return
- Three Way Calling (Media Server required)
- MWI (Message Waiting Indicator) based on LED & Tone
- DND (Do Not Disturb)
- Warm Line
- Hot Line
- Selective / Anonymous Call Rejection
- Music On Hold
- Caller ID (Type I and Type II)
- Caller ID Blocking
- Speed Dialing, Repeat Dialing
- Consultation Hold
Copyright © 2008 D-Link Australia Pty. Ltd.