D-Link DVG-2101SP User Manual page 17

Hide thumbs Also See for DVG-2101SP:

Table of Contents

DVG-2101SP User Manual

MAC Address Clone

Basically, every Ethernet interface (also called a NIC - Network Interface Card) has a MAC address. If the

administrator assigns IP addresses to devices according to the authorized MAC address, or only allows

devices with authorized MAC addresses to access network, you may manually enter the MAC address here.

MAC Address Clone

MAC Address

You can find the MAC address of your PC from Start > Run. In the run box type cmd and click OK.

For Windows 9x/ME, type winipcfg at the prompt and press Enter. The MAC address is listed as the "Adaptor

Address".

For Windows 2000/XP, type ipconfig /all at the prompt and press Enter. The MAC address is listed as the

"Physical Address".

Check this checkbox to enable the MAC Address Clone feature.

Enter the MAC address you want to use.

Table of Contents