D-Link DVG-2101SP User Manual page 23

Hide thumbs Also See for DVG-2101SP:

Table of Contents

DVG-2101SP User Manual

Do Not Disturb

Call Waiting

Consultation Hold

Conference

Call Back On Busy

PSTN Fail Over Relay

*You can only activate either Warm Line or Hot Line. If you check both of them, Hot Line's priority is always

set to a higher priority than to that of Warm Line.

Examples of Making a Conference Call

Scenario 1:

The first person dials the second person and asks the second person to wait.

The first person presses Flash then calls the third person (and keeps the second person on hold).

The third person answers the call. The first person dials *61 and then presses Flash to start the

conference call.

Scenario 2:

The first person dials the second person and the second person answers the call.

The third person dials the first person (call waiting) and the first person presses Flash to pick up the

second call and talk to the third person.

The first person dials *61 and then presses Flash to start the conference call.

Note: The availability of conference calls varies depending on your VoIP network. Please check with your ITSP

for this service.

Check this checkbox to reject incoming calls as busy or divert incoming calls to a voice

mail server when configured to do so.

Check the checkbox to receive a second call when a call is already ongoing on the same

phone port.

Check the checkbox to let you to place a call on hold, and then call another party to

consult privately, and afterward, return to the original call.

Check the checkbox to enable making conference calls.

Check the checkbox to enable call back on busy when the number you dialed is busy.

Check the checkbox to enable PSTN fail over relay when the Internet connection is not

available.

Table of Contents