Advertisement
Quick Links
All manuals and user guides at all-guides.com
D-Link DVG - 2101sp ATA Setup Guide
Light is on when
device is powered
up
Light is on when
Provisioning is
taking place
gotalk DVG-2101sp Setup Guide
With PSTN Lifeline
Light is on when
the VoIP account
is registered
Light is on when
the Ethernet cable
is connected
17/02/2009
Page 1 of 6
Light is on when the
phone is in use
Light is on if
PSTN Lifeline is
in use
Advertisement
Related Manuals for D-Link DVG-2101sp
Summary of Contents for D-Link DVG-2101sp
- Page 1 All manuals and user guides at all-guides.com D-Link DVG - 2101sp ATA Setup Guide With PSTN Lifeline Light is on when Light is on when Light is on when the the VoIP account device is powered phone is in use...
- Page 2 Pick up the handset attached to the DLink ATA and dial *666# Press 2 on the phones keypad Press 1 to hear the DHCP IP address to enter into the web browser to get to the ATA configuration page gotalk DVG-2101sp Setup Guide 17/02/2009 Page 2 of 6...
- Page 3 (example only, use the address provided above by dialing *666# 1 2) You will see the following page log in page Enter the user name as “admin” Password remains Blank gotalk DVG-2101sp Setup Guide 17/02/2009 Page 3 of 6...
- Page 4 All manuals and user guides at all-guides.com On the left hand side menu select “VoIP” gotalk DVG-2101sp Setup Guide 17/02/2009 Page 4 of 6...
- Page 5 Ensure “use domain to register” has a tick in the box Click “Apply” and the VoIP is ready to use, the device does not need to be rest after clicking “Apply” gotalk DVG-2101sp Setup Guide 17/02/2009 Page 5 of 6...
- Page 6 Then on the left hand side menu select “VoIP” and hover the mouse until the drop down list appears, then select “Codec” from the drop down list As shown in the image below Select the codec you wish to use and click “Apply” at the bottom gotalk DVG-2101sp Setup Guide 17/02/2009 Page 6 of 6...