Table of Contents
Advertisement
DVG-2101SP User Manual
Configuration
Prior to using your Web Browser for accessing the web-based configuration utility, if DHCP is not enabled on
your network, be sure to assign a static IP address to the VoIP Telephone Adapter.
Use the computer that was last connected directly to your Cable/DSL modem. Right-click My Network Places
> select Properties > right-click Local Area Connection > select Properties > double-click Internet Protocol
(TCP/IP).
Set your PC's IP address to
192.168.1.1 and the subnet mask to
255.255.255.0. The default gateway
and primary DNS server IP addresses
should be the LAN IP address of the
DVG-2101SP (192.168.1.150).
In order to use a web browser to configure the VoIP Adapter you must make sure it has a valid Ethernet
connection to a PC or LAN via its LAN port. Access the configuration utility to check the LAN port by entering
the IP Address into your web browser address field.
Open your Web browser and
type http://192.168.1.150 into
the URL address box. Press the
Enter or Return key.
When you first log in, enter
the Username "admin" and
leave the Password blank.
These may be changed later.
Click the Login button.
Click OK.
Copyright © 2008 D-Link Australia Pty. Ltd.
Advertisement
Table of Contents
