1. Manuals
  2. Brands
  3. D-Link Manuals
  4. Adapter
  5. DVG-2101S
  6. Quick installation manual

D-Link DVG-2101S Quick Installation Manual

Hide thumbs Also See for DVG-2101S:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
This product can be set up
using any current web browser,
i.e., Internet Explorer 6 or
Netscape Navigator 6.2.3.

Before You Begin

1. If you purchased this VoIP Telephone Adapter to share your high-speed
Internet connection with other computers, you must have an established
Internet account from an Internet Service Provider (ISP).
2. It's best to use the same computer that is connected to your router for
configuring the DVG-2101S VoIP Telephone Adapter. The DVG-2101S acts
as a DHCP Client and will be assigned all the necessary IP address
information from your network. See the Quick Installation Guide or the Manual
on the CD-ROM for setting each network adapter to automatically obtain an
IP address.
Check Your Package Contents
If any of the above items are missing, please contact your reseller.
©2007 D-Link Corporation, Inc. All rights reserved. Trademarks or registered trademarks are the property of their
respective holders. Software and specifications subject to change without notice.
D-Link DVG-2101S VoIP Telephone Adapter
CD-ROM (containing Manual and Q.I.G.)
Ethernet Cable
Phone Cable
12V, 1.5A Power Adapter
Quick Installation Guide
DVG-2101S
VoIP Telephone Adapter
with a different voltage rating
will damage and void the
warranty for this product.
1
Using a power supply

Advertisement

Table of Contents
loading

Related Manuals for D-Link DVG-2101S

Summary of Contents for D-Link DVG-2101S

  • Page 1: Before You Begin

    If any of the above items are missing, please contact your reseller. ©2007 D-Link Corporation, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and specifications subject to change without notice.

  • Page 2: Hardware Overview

    Hardware Overview Front Panel Phone LED Register LED This LED will light solid This LED will light solid if the phone when the telephone is account registers successfully. This LED off-hook. A fast blinking will flash during registering and light off if LED indicates an registering fails.

  • Page 3: Rear Panel

    Rear Panel Reset Button Use a paper clip to: 1. Press 1-2 seconds to enable IVR. Power Receptor 2. Press 4-6 seconds to reset this unit. Connects to the provided 3. Press 8-10 seconds to restore this power adapter. unit’s factory default settings. Phone Port WAN Port Connects to your...

  • Page 4: Configure Ip Settings

    Configure IP Settings To connect to the network, make sure the network adapter in your computer is configured properly. Here’s how to assign a static IP address to your PC. Go to Start > click Control Panel > click on the Network Connections icon.
  • Page 5 The dialog box displays a list of currently installed network items. Click Internet Protocol (TCP/IP). Select Properties. Make the choice to get the IP address assigned manually. Select Use the following IP address to get the IP settings assigned manually. Click OK.
  • Page 6 If your computer connects directly to a DSL or Cable modem and does not connect to a router, follow the steps below to install your DVG-2101S. For any other configuration, please refer to the user manual located on the CD- ROM.
  • Page 7 Restart your PC. The corresponding LEDs would light on to indicate that the DVG-2101S is ready for initial web configuration. After finishing your initial configuration as described on the next chapter, you need to unplug the Ethernet cable from the PC. And attach this end to the LAN port of your router or Cable/DSL Modem.
  • Page 8 Initial Web Configuration Open a Web browser and type http://192.168.1.150 into the URL address box. Press Enter Return key. When you first log in, enter the User name admin leave the Password blank. These may be changed later. button. Click Login Setup Wizard will guide you through the...
  • Page 9 Click Next. Step 1 You can change the login password during this step or just leave them the same as the default values. Click Next. Step 2 Select your time zone from the drop-down list. Then select a NTP time server or configure your preferred time server.
  • Page 10 Step 3-1 If you selected Static IP, enter the IP address, subnet mask and gateway supplied by your ISP. Click Next. Step 3-1-1 Static IP users have to set the DNS address. Click Next. Step 3-1 If you selected Dynamic IP, you may enter the host name in the field.
  • Page 11 ISP/ITSP. Click Next. Step 5 Setup is finished. Click Restart to reboot the DVG-2101S. Once the adapter is finished rebooting, turn on your modem and allow up to 2 minutes to connect to your ISP. Click Restart.

  • Page 12: Configuration Through Ivr

    Configuration through IVR The VoIP Adapter provides a convenient IVR (Interactive Voice Response) function to help you query and configure the basic settings of the VoIP Adapter with a phone and without turning on a PC. To access IVR mode, plug a phone into the VoIP Adapter and then pick up the handset and press * (star) 666 # (pound).
  • Page 14 Ver.1.00 2007/12/27...

Table of Contents