Table of Contents
Advertisement
DVG-2101SP User Manual
Static IP
Choose Static IP Address if the WAN IP information is provided to you by your ISP or you want to assign
a Static IP address to the DVG-2101SP manually. You will need to enter in the IP address, Subnet Mask,
Gateway address, and DNS addresses. You should enter the IP address, Subnet Mask, and Gateway address in
this page and enter the DNS addresses in the DNS page which is under the Advanced tab.
IP Address
Subnet Mask
Gateway
Input the IP Address you wish to assign to the WAN port.
Input your Subnet Mask. (All devices in the network must have the same subnet mask.)
Input the Gateway IP address, usually the IP address of the Router or Gateway on your
network.
Copyright © 2008 D-Link Australia Pty. Ltd.
Advertisement
Table of Contents
