1. Manuals
  2. Brands
  3. D-Link Manuals
  4. Adapter
  5. DVG-2102S
  6. Quick installation manual

D-Link DVG-2102S Quick Installation Manual

Hide thumbs Also See for DVG-2102S:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
.

Quick Installation Guide

Check Your Package Contents
DVG-2102S
VoIP TA
DVG-2102S
VoIP Telephone Adapter
CD-ROM
Phone Cord
Ether (CAT5
12VDC, 1A
UTP) Cable
Power Adapter
power
adapter with
a different
voltage rating
will damage
this product
and void the
warranty.
Using a

Advertisement

Table of Contents
loading

Related Manuals for D-Link DVG-2102S

Summary of Contents for D-Link DVG-2102S

  • Page 1: Quick Installation Guide

    Quick Installation Guide DVG-2102S VoIP Telephone Adapter Check Your Package Contents DVG-2102S CD-ROM Phone Cord Ether (CAT5 12VDC, 1A VoIP TA UTP) Cable Power Adapter Using a power adapter with a different voltage rating will damage this product and void the...

  • Page 2: Hardware Overview

    Hardware Overview Front Panel Power Green light indicates a normal power supply. A fast blinking light indicates the SIP Telephone Adapter is not registered. A slow blinking light indicates the SIP Telephone Adapter is communicating with the Auto Provision Server. When a connection is established the 10 or 100 LED will light up solid.

  • Page 3: Rear Panel

    Hardware Overview (continued) Rear Panel Power Receptor: Receptor for the provided power adapter. WAN: Connect to your broadband modem or your Ethernet enabled computers using Ethernet cabling. Phone: Connect to your phones using standard phone cabling (RJ- 11).

  • Page 4: Installing The Hardware

    C. Connect the power adapter to the power input at the back panel of the DVG-2102S and then plug the other end of the power adapter to a wall outlet or power strip. On the front of the device, the Power LED will turn on to indicate proper operation.
  • Page 5 Installing the Hardware (continued) After the installations are completed, your network should look similar to the diagram below. Hardware configuration is complete! If your VoIP service is already activated, you can make phone calls now.
  • Page 6 Configuration To access the web-based configuration utility, open a web browser such as Internet Explorer and enter the IP address of the DVG-2102S. Open your Web browser and type http://192.168.8.254 into the URL address box. Press the Enter or Return Key.
  • Page 7 Configuration (continued) Click Next. The username of ADMIN and USER have been defined and locked by default. It is highly recommended to create a login password to keep your router secure. Click Next. Enter a NTP server or use the default server Select your time zone from the drop-down menu.
  • Page 8 Configuration (continued) Select your Internet connection type: DHCP – Most Cable ISPs or if you are connecting the DVG-2102S behind a router. Static IP – Select if your ISP supplied you with your IP settings. PPPoE – Most DSL ISPs.
  • Page 9 Configuration (continued) Setup is finished. Check the summary of your settings. To make new settings effective, you must click on the Restart button to reboot the DVG-2102S. Click Restart.
  • Page 10 Ver. 1.00(WW) 2008/12/29...

Table of Contents