Honda 08E91-E22-100B Installation Instructions Manual page 16

52. Behind the fuse box, unplug the blue vehicle 23-
pin connector from the inside of the front lower
pillar, and plug the blue engine starter harness 23-
pin connectors into the blue vehicle 23-pin
connector. If the vehicle 23-pin connector is
difficult to disconnect, perform the work after first
disconnecting the connector on the upper side.
VEHICLE 23-PIN
CONNECTOR
(blue)
53. Unplug the white vehicle 14-pin connector at the
front lower pillar behind the fuse box, and plug the
engine starter harness 14-pin connectors into the
white 14-pin connector. Attach the engine starter
harness 14-pin connector to the vehicle 14-pin
connector.
WHITE VEHICLE
14-PIN
FUSE BOX
CONNECTOR
VEHICLE 14-PIN
CONNECTOR (white)
16 of 21
FUSE BOX
FRONT
SIDE VIEW
ENGINE STARTER
HARNESS 23-PIN
CONNECTOR (blue)
FRONT
LOWER
PILLAR
6D01132T
ENGINE
STARTER
HARNESS
14-PIN
CONNECTOR
6D01152T
54. Install the clip from the engine starter harness to
the fuse box bracket behind the fuse box.
55. Remove the ground bolt from the vehicle. Secure
the engine starter harness ground terminal with the
ground bolt you just removed.
AII 38215 (0710)
GROUND BOLT
(Reuse.)
FRONT
ENGINE STARTER
HARNESS GROUND
TERMINAL
CLIP
FUSE BOX
BRACKET
© 2007 American Honda Motor Co., Inc. - All Rights Reserved.
ENGINE
STARTER
HARNESS
6D01181T