Honda 08E91-E22-100B Installation Instructions Manual page 12

36. Route the engine starter harness 7-pin connectors
up the steering column and to the ignition switch.
Unplug the white vehicle 7-pin connector. Plug the
white engine starter harness 7-pin connectors into
the white vehicle 7-pin connectors.
ENGINE
STARTER
HARNESS
7-PIN
CONNECTOR
(white)
37. Unplug the brown vehicle 7-pin connector, and
plug the brown engine starter harness 7-pin
connector into the brown vehicle 7-pin connector.
NOTICE Make sure that the engine starter harness
7-pin connector (brown) is connected to the vehicle
connector and it is locked securely. A loosely
connected connector can cause engine stall during
driving.
ENGINE STARTER
HARNESS 7-PIN
CONNECTOR (brown)
Pull the connector and
check that it is locked
securely.
12 of 21
IGNITION
SWITCH
VEHICLE 7-PIN
CONNECTOR
(white)
6D01081T
VEHICLE 7-PIN
CONNECTOR (brown)
(Not reconnected.)
6D01091T
AII 38215 (0710)
38. Disconnect the vehicle 8-pin connector on the rear
of the wiper switch and plug the engine starter
harness 8-pin connectors into the vehicle 8-pin
connector.
VEHICLE 8-PIN
CONNECTOR
39. Secure the connected 8-pin connector with a wire
tie to the engine starter harness.
© 2007 American Honda Motor Co., Inc. - All Rights Reserved.
ENGINE STARTER
HARNESS
8-PIN CONNECTOR
WIPER
SWITCH
6D01101T
CONNECTED 8-PIN
CONNECTOR
WIRE TIE
ENGINE
STARTER
HARNESS
WIPER
6D01071T
SWITCH