Transferring A Security Policy To Another Client - NETGEAR FVG318 Reference Manual

Note: While your PC is connected to a remote LAN through a VPN, you might not have
normal Internet access. If this is the case, you will need to close the VPN
connection in order to have normal Internet access.

Transferring a Security Policy to Another Client

This section explains how to export and import a security policy as an .spd file so that an existing
NETGEAR ProSafe VPN Client configuration can be copied to other PCs running the NETGEAR
ProSafe VPN Client.
The following procedure
To export a security policy:
1. Select Export Security Policy from the File pull-down menu.
Figure 5-18
2. Once you decide the name of the file and directory where you want to store the client policy,
click Export.
In this example, the exported policy is named policy.spd and is being stored on the C drive.
Figure 5-19
Basic Virtual Private Networking
ProSafe 802.11g Wireless VPN Firewall FVG318 Reference Manual
(Figure 5-18) enables you to export a security policy as an .spd file.
v1.0, September 2007
5-17