NETGEAR ProSafe FVG318 Configuration Manual
Configure vpn between prosafe vpn client software and fvg318
Hide thumbs
Also See for ProSafe FVG318:
- Reference manual (204 pages) ,
- Features manual (11 pages) ,
- Datasheet (3 pages)
Advertisement
Quick Links
Configure VPN between ProSafe VPN Client Software and FVG318
The following configuration is tested with:
NETGEAR FVG318 with firmware version 1.0.41
NETGEAR ProSafe VPN Client Software version 10.5.1
Configure the FVG318
1. Log into the FVG318's admin GUI.
2. Click on VPN Wizard on the left panel under VPN.
3. Click Next.
4. Enter a connection name and a value for the pre-shared key. The same name and
pre-shared key have to be entered when configuring the ProSafe VPN client
software. Select This VPN tunnel will connect to A remote VPN client.
Advertisement
Related Manuals for NETGEAR ProSafe FVG318
Summary of Contents for NETGEAR ProSafe FVG318
- Page 1 Configure VPN between ProSafe VPN Client Software and FVG318 The following configuration is tested with: NETGEAR FVG318 with firmware version 1.0.41 NETGEAR ProSafe VPN Client Software version 10.5.1 Configure the FVG318 1. Log into the FVG318’s admin GUI. 2. Click on VPN Wizard on the left panel under VPN.
- Page 2 5. A summary of the VPN policy will be displayed. Click Done.
- Page 3 6. You can review the IKE policy and VPN policy by clicking on IKE Policies. 7. And VPN Policies under VPN. In most cases, you can just leave them as it.
- Page 4 Configure the ProSafe VPN Client Software 1. Right click on the ProSafe VPN client icon on the system tray and select Security Policy Editor. 2. Under the Options menu, select Global Policy Settings. The Global Policy Setting dialog box opens. Make sure Allow to Specify Internal Network Address is checked.
- Page 5 3. Under the Edit menu, select Add and select Connection. 4. A new connection will be created. You can rename the connection name by double click on the name. On the right panel, under Remote Party Identity and Addressing, select IP Subnet as ID Type, enter the LAN subnet on the FVG318 as Subnet and enter the LAN subnet mask as Mask.
- Page 6 5. On the left panel, click on Security Policy. On the right panel, select Aggressive Mode under Phase 1 Negotiation Mode. Make sure Enable Perfect Forward Secrecy is unchecked. Leave Enable Replay Detection checked.
- Page 7 6. Click on My Identity on the left panel. On the right panel, select None under Select Certificate. For ID Type, select Domain Name and enter <policy name><digit>.fvg_remote.com where the policy name is the VPN policy name you entered when configure VPN Wizard on the FVG318 and digit can be any digit, it is being used to distinguish multiple VPN client user connected to the FVG318 at the same time.
- Page 8 7. Click on the Pre-Shared Key button, and Click Enter Key. Enter the same pre- shared key you’ve entered when configure the FVG318. Click OK.
- Page 9 8. On the left panel, expand Security Policy and Authentication (Phrase 1) and click on Proposal 1. On the right panel, you can keep everything as default. Make sure they match the screen below. 9. On the left panel, expand on Key Exchange (Phrase 2) and click on Proposal 1. On the right panel, left everything as default.
- Page 10 11. To connect, right click on the ProSafe VPN client icon on the system tray and choose Connect, select the Connection Profile you just created. 12. A connection status window should be displayed and eventually, it should said Successfully connect to your connection profile. 13.