Configuring Wpa-Psk And Wpa2-Psk - NETGEAR FVG318 Reference Manual

ProSafe 802.11g Wireless VPN Firewall FVG318 Reference Manual

Configuring WPA-PSK and WPA2-PSK

Note: Not all wireless adapters support WPA and WPA2. Furthermore, client software is
required on the client. Windows XP and Windows 2000 with Service Pack 3 do
include the client software that supports WPA and WPA2. Nevertheless, the
wireless adapter hardware and driver must also support WPA and WPA2. Consult
the product document for your wireless adapter and WPA and WPA2 client
software for instructions on configuring WPA and WPA2 settings.
To configure WPA-PSK and WPA2-PSK:
1. Log in at the default LAN address of http://192.168.0.1, with the default user name of admin
and default password of password, or using whatever LAN address and password you have
set up.
2. Select Network Administration > Wireless Settings. The Wireless Settings Screen will display.
Figure 3-11
3. Select the WPA and WPA2 radio box and then select PSK from the WPA with: pull-down
menu in the Wireless Security Type section. The PSK settings fields in the PSK Settings
section will be highlighted.
3-20
v1.0, September 2007
Configuring Wireless Connectivity