NETGEAR FVG318 Reference Manual page 57

Figure 3-10
3. Select the WPA2 radio box and then select PSK from the WPA with: pull-down menu in the
Wireless Security Type section. The PSK settings fields in the PSK Settings section will be
highlighted.
Note: The Encryption choice will be AES by default. For WPA2+PSK, AES is used.
4. In the PSK Settings section:
• Enter the pre-shared key in the Passphrase field. Enter a word or group of printable
characters in the Passphrase box. The Passphrase must be 8 to 63 characters in length. The
256 Bit key used for encryption is generated from this passphrase.
• Enter a value in the Key Lifetime field. This setting determines how often the encryption
key is changed. Shorter periods provide greater security, but adversely affect performance.
If desired, you can change the default value.
5. Click Apply to save your settings.
Configuring Wireless Connectivity
ProSafe 802.11g Wireless VPN Firewall FVG318 Reference Manual
v1.0, September 2007
3-19