Activating The Vpn Tunnel; The Fvg318-To-Fvg318 Case - NETGEAR FVG318 Reference Manual

Note: The default log in address for the FVG318 router is http://192.168.0.1 with the
default user name of admin and default password of password. The login address
will change to the local LAN IP subnet address after you configure the router. The
user name and password will also change to the ones you have chosen to use in
your installation.

Activating the VPN Tunnel

You can activate the VPN tunnel by testing connectivity and viewing the VPN tunnel status
information as described in the following flowchart:
Fail
Fix the
Router Network
and then Retest
Figure C-2
All traffic from the range of LAN IP addresses specified on the router at Gateway A and the router
at Gateway B will now flow over a secure VPN tunnel.

The FVG318-to-FVG318 Case

Table C-1. Policy Summary
VPN Consortium Scenario:
Type of VPN
VPN Configuration of NETGEAR FVG318
ProSafe 802.11g Wireless VPN Firewall FVG318 Reference Manual
Fail
Test Step 2
Pass
Ping Remote
WAN IP Address
and then Retest
Scenario 1
LAN-to-LAN or Gateway-to-Gateway
v1.0, September 2007
Start
Test Step 1
Ping Remote
LAN IP Address
Fix the
VPN Tunnel
Pass
Test Step 3
View VPN
Tunnel Status
End
C-3