Chapter 2 — Set Up the Printer
Connect the Printer to Power
Print a Test Label
How to Create and Print Labels
22
The first time you turn on the printer, the Startup Wizard appears.
1 Connect one end of the power cord to the back of the printer and
connect the other end to AC power.
2 Press the power switch. When the printer starts, a progress bar
appears on the screen, and then the Startup Wizard appears.
3 Follow the instructions to configure basic printer settings.
4 Run another wizard to configure more printer settings, or go to the
Ready screen.
If a condition occurs that will prevent printing, the Ready-to-Work
indicator blinks.
After you load media and ribbon, print a test label to verify that
everything is installed correctly and to get printer information.
1 From the Main Menu, select Tools > Test Labels.
2 Select the label you want to print and press
your test label.
Use one of these methods to create and print labels:
•
Use Honeywell printer software. You can download label design
software and printer drivers from http://www.honeywellaidc.com.
•
Use the Fingerprint or IPL printer command language. For help, see
the
Fingerprint Command Reference
Reference.
. The printer prints
or the
IPL Command
PM42 Mid-Range Printer User Manual