Load Ribbon - Honeywell PM42 User Manual

Chapter 2 — Set Up the Printer

Load Ribbon

20
1 Open the media cover.
2 Turn the printhead lift lever counterclockwise to raise the printhead.
3 Slide the ribbon roll onto the ribbon supply hub and slide the empty
ribbon core onto the ribbon takeup hub:
• For ribbon that has the ink wound out, place the ribbon on the
supply hub with the ribbon wound clockwise.
• For ribbon that has the ink wound in, place the ribbon on the
supply hub with the ribbon wound counterclockwise.
The ribbon in this illustration has the ink wound out.
PM42 Mid-Range Printer User Manual