Honeywell PM42 User Manual page 29

PM42 Mid-Range Printer User Manual
4 Route the ribbon through the print mechanism and pull out
approximately 20 cm (8 inches) of ribbon leader.
The dashed line shows how to load ribbon with the ink wound in.
5 Turn the ribbon takeup hub counterclockwise until the ribbon
becomes tight and runs wrinkle-free through the print mechanism.
6 Load media.
7 Turn the printhead lift lever clockwise to lower the printhead.
8 Close the media cover.
9 Press the Print button to advance the media.
10 Configure the printer for the correct media type: media with gaps,
black mark, continuous fixed length, or continuous variable length.
11 Set the print method to ribbon (TTR).
12 Calibrate the sensors:
• From the printer Main Menu select Wizards > Calibration >
Media.
• From the printer web page select Services > Media Calibration.
Chapter 2 — Set Up the Printer
21