Connect The Printer To Power; About Printer Command Languages - Honeywell PC42t User Manual

Chapter 1 — About the Printer
12 Press and hold the Print button to print a test label. For help, see

Connect the Printer to Power

Caution: Use only the AC power adapter supplied with the printer.
The use of a power adapter not approved by Honeywell voids the
product warranty and may damage the printer.
Caution: Turn the printer off when not in use.
1 Connect the power adapter to the power port on the rear of the
2 Connect the power adapter to AC power. When the adapter is
3 Press the Power switch to turn the power on. As the printer starts up,
You can now set the printer command language or print a configuration
label. For help, see "How to Set the Printer Command Language" on
page 17 or "About Test Labels" on page 19.

About Printer Command Languages

A printer command language is a set of instructions that controls printer
functions:
•
•
•
•
The printer supports these command languages and language simulator
support options:
•
•
•
16
Calle Llanos de Jerez 18 Nave 9 Coslada https://v10consumibles.com Tel: 910 269 309
"About Test Labels" on page 19.
printer.
connected to AC power, the green LED in the adapter connector
turns on and stays on.
the green LED turns on and blinks.
The green LED turns on solid green when the printer is ready to print.
Configure the printer.
Return the status of the printer.
Control peripheral devices.
Format a label or receipt for printing.
Direct Protocol (DP)
ESim (EPL command language simulator)
ZSim (ZPL command language simulator)
V10 CONSUMIBLES S.L.
PC42t Desktop Printer User Guide