Load Media From An External Supply - Honeywell PM42 User Manual

Chapter 2 — Set Up the Printer

Load Media from an External Supply

18
You can place the media supply, such as fanfold tickets or tags, behind or
underneath the printer.
1 Open the media cover.
2 Turn the printhead lift lever counterclockwise to raise the printhead.
3 Feed media through the slot in the back of the printer (or from the slot
in the bottom of the printer) and route it through the print mechanism.
4 Turn the printhead lift lever clockwise to close the printhead.
5 Close the media cover.
6 Press the Print button to advance the media.
7 Configure the printer for the correct media type: media with gaps,
black mark, continuous fixed length, or continuous variable length.
PM42 Mid-Range Printer User Manual