Set The Command Language From The Main Menu; Set The Command Language From The Printer Web Page - Honeywell PM42 User Manual

Chapter 1 — About the Printer

Set the Command Language from the Main Menu

Set the Command Language from the Printer Web
Page
12
You can use the Settings option from the Main Menu to change the
printer command language.
1 From the Main Menu, select Settings > System Settings > General.
2 Press to scroll down to Command Language.
3 Press or to select a different command language.
4 Press to save your changes.
If you are prompted to enter a password for DSim or ZSim, the
password is 1138. To return to the Fingerprint menu system from
DSim or ZSim, the password is 8311.
To set the command language from the printer web page, you need to
turn on the printer and connect to your Ethernet network.
1 Make sure that the printer has media and ribbon (if necessary)
installed.
2 On your PC, open a Web browser.
3 In the Location or Address bar, type the printer IP address and
press Enter. The printer web page appears.
4 Click Login. The Login page appears.
5 Type your Username and Password and click Login. The default
username is itadmin
6 Click the Configure tab.
and the default password is
PM42 Mid-Range Printer User Manual
pass .